#Domoticz aeon labs z stick software

The good news is that they are possible to be calibrated. You might already have recognized that the temperature and humidity values of the Aeon Labs Multisensor 6 are incorrect. Calibrating the values ofР вЂ™Р’В the Aeon Labs Multisensor 6 We do the same thing for the motion sensor (default name is Р Р†Р вЂљРЎСљSensorР Р†Р вЂљРЎСљ in the device list) so it shows up on the dashboard as well. Looking at the Р Р†Р вЂљРЎСљDashboardР Р†Р вЂљРЎСљ tab of Domoticz, we find our temperature and humidity sensor and our previously added Z-Wave power plug. Now, go to the Р Р†Р вЂљРЎСљTemperatureР Р†Р вЂљРЎСљ tab and click on the star icon (to the left side of the Р Р†Р вЂљРЎСљLogР Р†Р вЂљРЎСљ button) so it turns yellow. Give it a name of your choice and click Р Р†Р вЂљРЎСљAdd DeviceР Р†Р вЂљРЎСљ.

On the right side of the row of the Temp + Humidity sensor we click on the green arrow to add the device to the Р Р†Р вЂљРЎСљTemperatureР Р†Р вЂљРЎСљ tab of Domoticz. WeР Р†Р вЂљРІвЂћСћd like to use the motion sensor and the Temp + Humidity sensor and add them to our dashboard of Domoticz. This is because the Aeon Labs Multisensor 6 comprises several sensors in one physical unit (hence the name Р Р†Р вЂљРЎСљmultisensorР Р†Р вЂљРЎСљ) and two virtual sensors. Selecting Р Р†Р вЂљРЎСљDevicesР Р†Р вЂљРЎСљ in the Р Р†Р вЂљРЎСљSetupР Р†Р вЂљРЎСљ menu in the upper right corner of Domoticz, gives us the list of devices in our Z-Wave network. In theР вЂ™Р’В nodes list of our Raspberry controller we can now see our Aeon Labs Multisensor 6 showing up next to our Philio power plug we added previously. The inclusion process starts and we click once on the Action Button on the Multisensor (make sure itР Р†Р вЂљРІвЂћСћs powered on). In the Р Р†Р вЂљРЎСљNode managementР Р†Р вЂљРЎСљ dropdown list, click on Р Р†Р вЂљРЎСљInclude NodeР Р†Р вЂљРЎСљ. Then we click on the blue Р Р†Р вЂљРЎСљSetupР Р†Р вЂљРЎСљ button next to the version number. To add the Multisensor in Domoticz, we start exactly as we did with the power plug ( explained in this post) by selecting Р Р†Р вЂљРЎСљHardwareР Р†Р вЂљРЎСљ in the Р Р†Р вЂљРЎСљSetupР Р†Р вЂљРЎСљ menu, which gives us this view. For the sake of simplicity we use a 5 volt micro USB power adapter while we configure it. You can use the Multisensor with both a power adapter and batteries. If yours has not, make sure you reset it by pressing and holding the action button for 20 seconds carefully while the Multisensor is powered on.

A 5 volt micro USB power adapter (or two CR123A batteries).

Domoticz ( installation guide can be found here).

A Raspberry Pi 2 (model B) with a Razberry Z-Wave add-on card.

What equipment do we use to add and configure the Multisensor 6?

Vibration sensor (mainly for tampering alerts)Р вЂќР вЂћfter adding the multisensor, we will be focusing on the features of the motion sensor, the temperature sensor and humidity sensor.

The multisensor is one physical device but comprises six different sensors:

Now, in this post we will add and configure an Aeon Labs Multisensor 6 in Domoticz. So itР Р†Р вЂљРІвЂћСћs not likely that you would use the stick for any functional purpose with a SmartThings network, but you might use it for troubleshooting.In previous post we added a Z-Wave power plug in Domoticz ( click here to read the post). If you add a zstick as a secondary to your SmartThings network, you can then use the zensys mapping tools with Z stick and get a map of your SmartThings zwave network. Some community members have done that because SmartThings doesnР Р†Р вЂљРІвЂћСћt give us any network mapping utilities at all. It is possible to add a z stick as a secondary controller to SmartThings. So essentially as a SmartThings user you already have the equivalent of the zstick inside the smartthings hub.

#Domoticz aeon labs z stick software

There are other similar software systems that rely on the Z stick to provide the radio. One of the competitors to SmartThings is the indigo system, which is software that you run on a laptop and then it uses the radio in the Aeon zstick to communicate with Z wave devices. You have to plug it into a laptop to operate it. What is the exact purpose for the Aeotec by Aeon Labs ZW090 Z Stick is it something we need in our toolbag?

Domoticz aeon labs z-stick